|
provides information on how to view and edit general information about the WLAN 802.11be waveform. |
|
|
describes how to configure WLAN 802.11be PHY and MAC layer parameters, payload data, and spectrum control parameters for a carrier when using the following generation mode:
|
|
|
describes how to configure WLAN 802.11be PHY and MAC layer parameters, payload data, and spectrum control parameters for a carrier when using the following generation mode:
|
|
|
describes how to configure WLAN 802.11be PHY and MAC layer parameters, payload data, and spectrum control parameters for a Non-HT Duplicate Transmission. |
|
| RU Configuration (MU) |
describes how to configure WLAN 802.11be resource unit parameters when using the following generation mode:
|
| RU Configuration (TB) |
describes how to configure WLAN 802.11be resource unit parameters when using the following generation mode:
|
| User Configuration (MU) |
describes how to configure WLAN 802.11be PHY and MAC layer parameters, payload data, and spectrum control parameters for a user when using the following generation mode:
|
| User Configuration (TB) |
describes how to configure WLAN 802.11be PHY and MAC layer parameters, payload data, and spectrum control parameters for a user when using the following generation mode:
|
| MPDU Configuration |
describes how to configure WLAN 802.11be PHY and MAC layer parameters, payload data, and spectrum control parameters for a data unit when using the following generation modes:
|